Tungsten Carbide Disc Cutter Carbide cutting blades For cigarette
Advantage of carbide disc cutter:
1 continuous production of buttons over 15 years
2 total production quantity of buttons up to 800 tons
3 widely exported to Europe,America,Australia, Brazil, India,
4 We, LIZHOU CARBIDE, promise you the 100% raw material.
5 We, LIZHOU CARBIDE, quotation your order with 24 hours
6 We, LIZHOU CARBIDE , accept your order as per your requirements
|grade||density g/cm3||hardness HRA||T.R.S MPa||performance&application recommended|
|SH25||14.7||90.0||2400||Higher strength,impact and shock resistance than SH6A,but lower in
wear resistance and cutting speed,it is suitable for rough
machining cast iron,nonferrous metal and its alloy as well as non
metallic materials at low cutting speed|
|other grades and sizes can be offered as per customers'requirements|
Application of carbide disc cutter:
Tungsten carbide disc cutter is mainly used for cutting paper,
rubber, plywood, hardwood, PCB, PVC, stainless steel, high
manganese steel and PCB, PVC electronic circuit boards and other
materials. These products require high precision, no glitches,
maximum abrasion resistance. We are using HIP sintered and fine
grinding, polishing plating to reduce frictions when cutting,
improved the accuracy and speed slitting greatly, tool life
Packing & Delivery
zhuzhou Mingri Tungsten Carbide Co., Ltd. was established in May of
2001 with the investment of RMB 40 million. We have up-to-date
production machine line and a lot of technicians.
Zhuzhou MingRi Cemented carbide co.,ltd is located in the tungsten
carbide hometown , convenient transportation, from changsha airport
just 40 minutes, wuhan just 1.5 hour, from guangzhou just 2 hours.
A favorable peripheral environment for cemented carbide
manufacturing provides a natural barrier. Convenient traffic for
tomorrow's internationalization laid a wide road.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown
cartons. If you have legally registered patent, we can pack the
goods in your branded boxes after getting your authorization
Q2. What is your terms of payment?
A: T/T 50% as deposit, and 50% before delivery. We'll show you the
photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery